Product Design Engineer 石油天然气领域大型机械及管道产品设计工程师(急招)
|
|
| ||||||||||||
职位描述/要求：
世界500强公司能源天然气领域产品急招设计经理工程师,项目费用评估经理及工程师,材料加工工艺及检测经理及工程师若干名.
Product Design Engineer
职位描述：
ESSENTIAL FUNCTION / RESPONSIBILITIES: Responsible for Gas Turbine driven train packaging and Auxiliary Systems for GE Oil & Gas product line, in particular the candidate will be involved in structural design for base-plate, piping system design, auxiliaries equipment selection and system specification. It will be his responsibility technical documentation issuing (Customer & Manufacturing documentation), looking for quality and timeliness. Design will be based on O&G design practice and project requirements, starting from customer specification reading and translation into project technical documentation to be issued for project execution. The right candidate will have the ability to: Manage entire project by reviewing drawings produced by drafters starting from the input given by him. Manage total of hours spent on the project and allocate right resources (drafters) for assigned tasks Develop the design using CAD and communication with 3D modelers/drafting Justify the design concepts with hand calculations and FEA Present ideas through design review and drawing sign-off Validate the design through specific activities at supplier facilities Provide right support during manufacturing phase Support design from concept to lessons learned coming from fleet utilization QUALIFICATIONS / REQUIREMENTS: * Mechanical engineering degree (5 years) or equivalent * Strong technical skills * Interpersonal skills * A minimum of 2-3 years engineering experience of practical application * A Master dgree in relevant technical background is preferred. DESIRED: * Familiarity with O&G product, structural and piping design. - Mechanical design experience with ANSYS, CAESAR or other equivalent FEA tool. * Unigraphics(UG) CAD experience or alternative experience on 3D CAD systems - English fluent Packaging & Auxiliary design engineer will work in a very stimulating and dynamic environment, where customer touch, quality and technical rigor will be the key for the success. Daily will be the focus for continuous improve of design process and product quality, looking also to supplier capability, manufacturing process and field installation follow-up. 其它相关职位:
Product Design Team Leader 1名(急招)ESSENTIAL FUNCTION / RESPONSIBILITIES:
Responsible for Gas Turbine driven train packaging and Auxiliary Systems for GE Oil & Gas product line, in particular the candidate will be involved in structural design for base-plate, piping system design, auxiliaries equipment selection and system specification. It will be his responsibility technical documentation issuing (Customer & Manufacturing documentation), looking for quality and timeliness. Design will be based on O&G design practice and project requirements, starting from customer specification reading and translation into project technical documentation to be issued for project execution. The right candidate will have the ability to: * Manage entire project by reviewing drawings produced by drafters starting from the input given by him. * Manage total of hours spent on the project and allocate right resources (drafters) for assigned tasks * Develop the design using CAD and communication with 3D modelers/drafting * Justify the design concepts with hand calculations and FEA * Present ideas through design review and drawing sign-off * Validate the design through specific activities at supplier facilities * Provide right support during manufacturing phase * Support design from concept to lessons learned coming from fleet utilization QUALIFICATIONS / REQUIREMENTS: * Mechanical engineering degree (5 years) or equivalent * Strong technical skills * A minimum of 5 years engineering experience of practical application and people leadership. * A Master dgree in relevant technical background is preferred. * Excellent presentation and communication skills * Excellent motivational and leadership skills * Project / Program management skills DESIRED: * Familiarity with O&G product, structural and piping design. - Mechanical design experience with ANSYS, CAESAR or other equivalent FEA tool. * Unigraphics(UG) CAD experience or alternative experience on 3D CAD systems - English fluent Packaging & Auxiliary design engineer will work in a very stimulating and dynamic environment, where customer touch, quality and technical rigor will be the key for the success. Daily will be the focus for continuous improve of design process and product quality, looking also to supplier capability, manufacturing process and field installation follow-up. Material & Processes Engineering Team Leader 1名(急招)ESSENTIAL FUNCTION / RESPONSIBILITIES:The Material & Processes Engineering Team is part of the Advance Technology Organization supporting Engineering, Sourcing and Global Service from the point of view of material selection/properties, special process, NDT, failure, lifing and repair technologies. In this team the Materials & Processes Expert is responsible for: As an expert the jobholder acts as the single point of contact for all Oil and Gas Sourcing for the application and approval of all Special Processes and Non Destructive Testing and more specifically regarding the materials properties and how they react with the different manufacturing processes He is a resource for all Engineering personnel and Sourcing personnel as an expert related to the chemical and mechanical properties for all manufacturing processes and especially special processes. He is able to indicate equivalent materials to EU or USA standards and he is in charge to write the relevant technical documentation. He manages Supply Deviation Requests and he is responsible for Corrective action Implementation He works closely with the Engineering NPI team as it relates to material properties. Seek Best Practices throughout the Oil and Gas Supply Chain. QUALIFICATIONS / REQUIREMENTS: * Minimum 6-8 yrs background in Material Properties and Special Processes and people leadership. * Minimum 5yrs experience with Non-Destructive Testing * Knowledge of chemical, mechanical, the impact of Manufacturing processes on the material properties of material * Knowledge of sand casting, forging, heat treatment process * Knowledge of applying NDT technology to Manufacturing Applications * Knowledge of Measurement System and Gage calibration * Ability to work and develop new approaches and technology to solve issues * Excellent presentation and communication skills * Excellent motivational and leadership skills * Project / Program management skills * Master Degree in relevant technical background is preferred. * NDT Level II Certification is a plus (Radiographic Test, Magnetic Particle Inspection, Ultrasonic Inspection, Dye Penetrant Inspection). Material & Processes Engineer 4名(急招)
职位描述：
ESSENTIAL FUNCTION / RESPONSIBILITIES: The Material & Processes Engineering Team is part of the Advance Technology Organization supporting Engineering, Sourcing and Global Service from the point of view of material selection/properties, special process, NDT, failure, lifing and repair technologies. In this team the Materials & Processes Expert is responsible for: As an expert the jobholder acts as the single point of contact for all Oil and Gas Sourcing for the application and approval of all Special Processes and Non Destructive Testing and more specifically regarding the materials properties and how they react with the different manufacturing processes He is a resource for all Engineering personnel and Sourcing personnel as an expert related to the chemical and mechanical properties for all manufacturing processes and especially special processes. He is able to indicate equivalent materials to EU or USA standards and he is in charge to write the relevant technical documentation. He manages Supply Deviation Requests and he is responsible for Corrective action Implementation He works closely with the Engineering NPI team as it relates to material properties. QUALIFICATIONS / REQUIREMENTS: * Minimum 5yrs background in Material Properties and Special Processes * Minimum 5yrs experience with Non-Destructive Testing * Knowledge of chemical, mechanical, the impact of Manufacturing processes on the material properties of material * Knowledge of sand casting, forging, heat treatment process * Knowledge of applying NDT technology to Manufacturing Applications * Knowledge of Measurement System and Gage calibration * Ability to work and develop new approaches and technology to solve issues * Master Degree in relevant technical background is preferred. * NDT Level II Certification is a plus (Radiographic Test, Magnetic Particle Inspection, Ultrasonic Inspection, Dye Penetrant Inspection). Value Engineering Team Leader 1名(急招)ESSENTIAL FUNCTION / RESPONSIBILITIES:
* Work with component owners, manufacturing and sourcing teams and suppliers to establish cost concepts/models for turbo compressors machinery mechanical/electrical systems & components. * Investigate design practices and experiences across GE O&G products to identify cost reduction opportunities to turbo compressors machinery mechanical/electrical components material, processing and design optimization. * Lead or support the assessment of cost reduction concepts/opportunities and develop project potentials. * Prepare project scope describing basic idea, identify high-level actions, risks and how to address them, and transfer projects to engineering owners. * Actively support business initiatives on idea generation and best practice sharing with cross-functional teams and internal / external suppliers. QUALIFICATIONS / REQUIREMENTS: * BS+ degree on Mechanical Engineering. * 5+ years working experience on mechanical/structural/composite product design, manufacturing or field service and people leadership. * Good knowledge on machinery or material processing. Experience with applicable industry or material codes & standards * Good insight into the design for manufacturing; be able to link designs to efficient manufacturing practices. * Be able to make engineering cost estimates, and project the reliable assessment of cost saving to Engineering Leaders. * Self-directed and solution-oriented, flexibility in handling a diverse and challenging workload. * Great communication, organizational, and project execution skills. * Fluent English (written & verbal) and working experience in multi-national, cross-functional and multi-cultural teams. * Excellent motivational and leadership skills * Project / Program management skills DESIRED: * 6-Sigma GB certified (GE internal) * MS+ advanced degree in Engineering * Experience in O&G technology or mechanical/electrical hardware. Value Engineer 9名(急招)
职位描述：
ESSENTIAL FUNCTION / RESPONSIBILITIES: * Work with component owners, manufacturing and sourcing teams and suppliers to establish cost concepts/models for turbo-compressors machinery mechanical/electrical systems & components * Investigate design practices and experiences across GE O&G products to identify cost reduction opportunities to turbo compressors mechanical/electrical systems & components through coating, material, processing and design optimization. * Lead or support the assessment of cost reduction concepts/opportunities and develop project potentials. * Prepare project scope describing basic idea, identify high-level actions, risks and how to address them, and transfer projects to engineering owners. * Actively support business initiatives on idea generation and best practice sharing with cross-functional teams and internal / external suppliers. QUALIFICATIONS / REQUIREMENTS: * BS+ degree on Mechanical Engineering. 3+ years working experience on mechanical/structural/composite product design, manufacturing or field service. * Good knowledge on machinery or material processing. Experience with applicable industry or material codes & standards * Good insight into the design for manufacturing; be able to link designs to efficient manufacturing practices. * Be able to make engineering cost estimates, and project the reliable assessment of cost saving to Engineering Leaders. * Self-directed and solution-oriented, flexibility in handling a diverse and challenging workload. * Great communication, organizational, and project execution skills. * Fluent English (written & verbal) and working experience in multi-national, cross-functional and multi-cultural teams. DESIRED: * 6-Sigma GB certified (GE internal) * MS+ advanced degree in Engineering * Experience in turbo-compressors machinery technology or mechanical / electrical hardware. 著名美国公司在中国油气领域组建新的研究团队,急招这个领域产品设计team ,材料工艺team,项目费用估算team.
联系方式：
| |||||||||||||
 |
|
 |
 |
|
 |